Table of Contents
Advertisement
3 Connections
The following section introduces the hardware connections for the ZyAIR.
3.1 Outdoor Access Point & Bridge and Inline Power Injector
Ports
1. This is the special Ethernet port for connecting the MIL-C-5015 style Ethernet cable.
2. This is the special serial port for connecting the MIL-C-5015 style RS-232 console port cable.
3. This is the grounding port
4. These are the special N-Type connectors for connecting the antenna or an RF cable.
5. The POWER & DATA OUT port on the inline power injector is used for connecting the other
end of the MIL-C-5015 style Ethernet cable.
6. The DATA IN port on the inline power injector is used for connecting the Ethernet cable to a hub,
switch, router or a computer.
ZyAIR B-5000 Quick Installation Guide
Figure 3 - ZyAIR Hardware Casing
5
Advertisement
Table of Contents
