The Inline Power Injector Back Panel; The Inline Power Injector Front Panel - ZyXEL Communications ZyXEL ZyAIR B-5000 Quick Installation Manual

3.3 The Inline Power Injector Back Panel

LABEL DESCRIPTION AND FUNCTION
AC IN 100 ~ Connect the end of the included power cord to this power socket.
240V
After you've made the connection, connect the power cable to a power supply and look at the front panel
POWER LED.
The POWER LED turns steady on when the power cord is connected.

3.4 The Inline Power Injector Front Panel

LABEL DESCRIPTION AND FUNCTION
POWER & Connect the RJ-45 Ethernet connector end of the MIL-C-5015 style Ethernet cable to this
DATA OUT port.
DATA IN Use an Ethernet cable to connect this port to a Local Area Network (LAN). This port is
auto negotiating (can connect at 10 or 100Mbps) and auto-crossover (automatically
adjusts to straight-through or crossover).
The ACTIVE LED turns steady on when the ZyAIR is connected to this port.
ZyAIR B-5000 Quick Installation Guide
Figure 7 - Inline Power Injector Back Panel
Table 2 - The Inline Power Injector Back Panel
Table 3 - The Inline Power Injector Front Panel
7