Figure 5-2 Remote Node Profile For Pptp Encapsulation; Table 5-2 Fields In Menu 11.1 (Pptp Encapsulation) - ZyXEL Communications Prestige 314 PLUS User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name=N/A
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
PPTP :
IP Addr=
Server IP Addr=
Connection ID/Name=
Press Space Bar to Toggle.
The next table shows how to configure the new fields in the Remote Node Profile menu.
FIELD
Encapsulation
My IP Addr
Server IP Addr
Connection
ID/Name
Schedules
Nailed-Up
Connections
5-4
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:

Figure 5-2 Remote Node Profile for PPTP Encapsulation

Table 5-2 Fields in Menu 11.1 (PPTP Encapsulation)

Press the [SPACE BAR] to choose PPTP. You must also go to
menu 11.3 to check the IP Address setting once you have
selected the encapsulation method.
Enter the IP address of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must
follow the "c:id" and "n:name" format.
This field is optional and depends on the requirements of your
xDSL Modem.
You can apply up to four schedule sets here. For more details
please refer to the Call Schedule Scheduling chapter.
Use the [SPACE BAR] to select Yes if you want to make the
connection to this remote node a nailed-up connection.
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-up Connections= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 300
Edit Traffic Redirect= No
DESCRIPTION EXAMPLE
PPTP
10.0.0.140
10.0.0.138
N:My ISP
No
Remote Node Setup