Appendix E Netbios Filter Commands - ZyXEL Communications Prestige 314 PLUS User Manual

Broadband sharing gateway with 4-port switch
Hide thumbs Also See for Prestige 314 PLUS:
Table of Contents

Advertisement

Introduction
NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to
connect to and communicate with a LAN.
For some dial-up services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.
You can configure NetBIOS filters to:
Block or forward NetBIOS packets from being sent from the LAN to the WAN.
Block or forward NetBIOS packets from being sent from the WAN to the LAN.
Allow or deny NetBIOS packets to be sent through VPN connections.
Block or forward NetBIOS packets from initiating calls.
Display NetBIOS Filter Settings
Syntax:
sys filter netbios disp
This command displays the current NetBIOS filter settings.
NetBIOS Filter Commands
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
NetBIOS Filter Commands
The following describes the NetBIOS packet filter commands.
=============== NetBIOS Filter Status ===============
LAN to WAN:
WAN to LAN:
IPSec Packets:
Trigger Dial:
Diagram 8 NetBIOS Display Filter Settings Command
Forward
Forward
Forward
Disabled
Appendix E
I

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-314P-314plus

Table of Contents