Figure 2-7 Menu 1 - General Setup; Table 2-5 General Setup Menu Field - ZyXEL Communications Prestige 314 PLUS User Manual

Step 2. Fill in the required fields. Refer to the table shown next for more information about these fields.
FIELD
System Name Choose a descriptive name for identification purposes. It is
recommended you enter your computer's "Computer name" in this
field. This name can be up to 30 alphanumeric characters long. Spaces
are not allowed, but dashes "-" and underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domainname" to see the current domain
name used by your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
Edit Dynamic Press the [SPACE BAR] to select Yes or No (default). Select Yes to
DNS configure Menu 1.1 – Configure Dynamic DNS (discussed next).
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
2.8.3 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1 – General Setup and press select Yes in the Edit Dynamic
DNS field. Press [ENTER] to display Menu 1.1– Configure Dynamic DNS as shown next.
Hardware Installation & Initial Setup
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 1 - General Setup
System Name= ?
Domain Name=
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel:
Figure 2-7 Menu 1 — General Setup

Table 2-5 General Setup Menu Field

DESCRIPTION EXAMPLE
P314_PLUS
zyxel.com.tw
No
2-11