Supported Mibs; Snmp Configuration - ZyXEL Communications Prestige 314 PLUS User Manual

•
Get - Allows the manager to retrieve an object variable from the agent.
•
GetNext - Allows the manager to retrieve the next object variable from a table or list within an agent. In
SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a Get
operation, followed by a series of GetNext operations.
•
Set - Allows the manager to set values for object variables within an agent.
•
Trap - Used by the agent to inform the manager of some events.
9.2

Supported MIBs

The P314 PLUS supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the MIBs is to let
administrators collect statistic data and monitor status and performance.
9.3

SNMP Configuration

To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown
next. The "community" for Get, Set and Trap fields is SNMP terminology for password.
The following table describes the SNMP configuration parameters.
SNMP Configuration
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Figure 9-2 Menu 22 — SNMP Configuration
9-3