ZyXEL Communications Prestige 314 PLUS User Manual page 191

If you just wish to block certain users from using these services, then use filtering
TELNET Server:
FTP Server:
Web Server:
SNMP Service:
DNS Service:
Press ENTER to Confirm or ESC to Cancel:
FIELD
TELNET Server FTP
Server
Web Server
SNMP Server
DNS Server
Server Port
Server Access
Secured Client IP
Remote Management
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 24.11 - Remote Management Control
Port = 23
Secured Client IP = 0.0.0.0
Port = 21
Secured Client IP = 0.0.0.0
Port = 80
Secured Client IP = 0.0.0.0
Port = 161
Port = 53
– please see menu 21.1.
Figure 14-2 Menu 24.11 – Remote Management Control
Table 14-1 Menu 24.11 – Remote Management Control
Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management.
Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
The default 0.0.0.0 allows any client to use this service to remotely
manage the Prestige. Enter an IP address to restrict access to a
client with a matching IP address.
Access = WAN only
Access = LAN only
Access = LAN only
Access = LAN only
Access = LAN only
DESCRIPTION EXAMPLE
53
LAN only
0.0.0.0
14-3