Figure 5-5 Remote Node Network Layer Options - ZyXEL Communications Prestige 314 PLUS User Manual

Table 5-4 Remote Node Network Layer Options Menu Fields
FIELD
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol
used to establish membership in a Multicast group. The Prestige
supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).
Press [SPACE BAR] to enable IP Multicasting or select None to
disable it. See the previous Part for more information on this feature.
Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to
menu 11. Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration,
or press [ESC] at any time to cancel.
5.2.1 Editing TCP/IP Options (with PPTP Encapsulation)
Make sure that Encapsulation is set to PPTP in menu 11.1. Then move the cursor to the Edit IP field in
menu 11.1, press the [SPACE BAR] to toggle No to Yes. Press [ENTER] to open Menu 11.3 - Network
Layer Options.
The next table gives you instructions about configuring remote node network layer options.
Remote Node Setup
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
DESCRIPTION
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Address= N/A
Rem Subnet Mask= N/A
My WAN Addr= N/A
Network Address Translation= SUA Only
Metric= 1
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.

Figure 5-5 Remote Node Network Layer Options

EXAMPLE
IGMP-v2
5-9