Telnet Login - ZyXEL Communications Prestige 314 PLUS User Manual

TELNET Login

Successfully
TELNET Login Fail
FTP Login
Successfully
FTP Login Fail
NAT Session Table is
Full!
!! Phase 1 ID type
mismatch
!! Phase 1 ID content
mismatch
!! No known phase 1
ID type found
LOG MESSAGE
UPnP pass through Firewall
CATEGORY
URLFOR
URLBLK
Log Descriptions
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Chart 2 System Maintenance Logs
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via ftp.
Someone has failed to log on to the router via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
The ID type of an incoming packet does not match the local's peer ID
type.
The ID content of an incoming packet does not match the local's peer
ID content.
The ID type of an incoming packet does not match any known ID type.
Chart 3 UPnP Logs
Chart 4 Content Filtering Logs
LOG MESSAGE
IP/Domain Name
IP/Domain Name
UPnP packets can pass through the firewall.
The Prestige allows access to this IP address or domain
name and forwarded traffic addressed to the IP address or
domain name.
The Prestige blocked access to this IP address or domain
name due to a forbidden keyword. All web traffic is disabled
except for trusted domains, untrusted domains, or the
cybernot list.
DESCRIPTION
DESCRIPTION
M