Confirm Save Screen; Table 11 Security Settings: Ieee 802.1X - ZyXEL Communications NWD-370N User Manual

The following table describes the labels in this screen.

Table 11 Security Settings: IEEE 802.1x

LABEL
Authentication
Type
Login Name
Password
Certificate
Server CA
PEAP Inner EAP
Back
Next
Exit

4.3.2 Confirm Save Screen

Use this screen to confirm and save the security settings.
Chapter 4 Wireless Configuration
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select a certificate authority (CA) that you trust and accept any certificates signed
by the CA.
Otherwise, select Trust Any to accept certificates from any CA.
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
ZyXEL NWD-370N User's Guide
43.
43