Figure 30 Profile: Wireless Settings; Table 15 Profile: Wireless Settings - ZyXEL Communications NWD-370N User Manual

ZyXEL NWD-370N User's Guide
The following table describes the labels in this screen.

Table 15 Profile: Wireless Settings

LABEL
Wireless Settings
Wireless Mode
Channel
3 If you selected Infrastructure network type in the first screen, select WEP, WPA,
WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you selected Ad-Hoc network type in the first screen, you can use only
WEP encryption method. Otherwise, select DISABLE to allow the NWD-370N to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step 5.

Figure 30 Profile: Wireless Settings

4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the NWD-370N. Refer to
wireless security configuration.
48
DESCRIPTION
This is the wireless standard the NWD-370N uses. In Ad-Hoc mode, you can use
only 802.11g.
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Section 4.3.1 on page 39 for detailed information on
Chapter 4 Wireless Configuration