Security Settings; Wep Encryption; Figure 22 Security Setting: Wep; Table 8 Security Setting: Wep - ZyXEL Communications NWD-370N User Manual

4.3.1 Security Settings

When you configure the NWD-370N to connect to a network with wireless security activated
and the security settings are disabled on the NWD-370N, the screen varies according to the
encryption method used by the selected network.

4.3.1.1 WEP Encryption

Figure 22 Security Setting: WEP

The following table describes the labels in this screen.

Table 8 Security Setting: WEP

LABEL
Security Settings
WEP
Encryption Type
Pass Phrase
Transmit Key
Chapter 4 Wireless Configuration
DESCRIPTION
Select 64 Bits, 128 Bits or 152 Bits to activate WEP encryption and then fill in the
related fields.
Select an authentication method. Choices are Open, Shared and Auto Switch.
Refer to Section 3.2.1.1.2 on page 33
Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the NWD-370N automatically generates four different WEP keys
and displays it in the key field below. Refer to
more information.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyXEL NWD-370N User's Guide
for more information.
Section 3.2.1.1.1 on page 32 for
39