Chapter 3 Maintenance; Removing The Zyair Utility; Upgrading The Zyair Utility; Figure 3-1 Confirm Uninstallation - ZyXEL Communications ZyXEL ZyAIR G-300 User Manual

3.1

Removing the ZyAIR Utility

Follow the steps below to remove (or uninstall) the ZyAIR Utility from your computer.
1. Close and exit the ZyAIR Utility.
2. Click Start, (all) Programs, ZyAIR G-300 PCI Adapter Utility, Uninstall ZyAIR G-300 Adapter
Utility.
3. When prompted, click OK to remove the driver and the utility software.
4. Click Finish and restart the computer when prompted.
3.2

Upgrading the ZyAIR Utility

To perform the upgrade, follow the steps below.
1. Download the latest version of the utility from the ZyXEL web site and save the file on your computer.
2. Follow the steps in the Removing the ZyAIR Utility section to remove the current ZyAIR Utility from
your computer.
3. Restart the computer when prompted.
4. After restarting, refer to the procedure in the Quick Installation Guide to install the new utility.
5. Check the version numbers in the About screen to make sure the new utility is installed properly.
Maintenance
This chapter describes how to uninstall or upgrade the ZyAIR Utility.

Figure 3-1 Confirm Uninstallation

ZyAIR G-300 User's Guide
Chapter 3
Maintenance
3-1