Ieee 802.1X; Figure 25 Security Setting: 802.1X - ZyXEL Communications NWD-370N User Manual

ZyXEL NWD-370N User's Guide
Table 10 Security Setting: WPA/WPA2
LABEL
Password
Certificate
Server CA
PEAP Inner EAP
Back
Next
Exit

4.3.1.4 IEEE 802.1x

Configure IEEE 802.1x security with various authentication methods in this screen.

Figure 25 Security Setting: 802.1x

42
DESCRIPTION
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select a certificate authority (CA) that you trust and accept any certificates signed
by the CA.
Otherwise, select Trust Any to accept certificates from any CA.
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
43.
Chapter 4 Wireless Configuration