Bandwidth Management Wizard; Figure 24 Voip Setup Wizard > Registration Complete (Fail); Table 16 Voip Setup Wizard > Registration Complete (Fail) - ZyXEL Communications Network Device P-2302 User Manual

Chapter 3 Wizard Setup
Figure 24 VoIP Setup Wizard > Registration Complete (Fail)
The following table describes the labels in this screen.
Table 16 VoIP Setup Wizard > Registration Complete (Fail)
LABEL
< Back
Register Again
Exit

3.4 Bandwidth Management Wizard

Use this wizard to control how much traffic can pass through your ZyXEL Device and the
priority of each service (application) that can use it. Each service you select is guaranteed a
small amount of bandwidth. The remaining bandwidth is divided by priority. If one service has
higher priority than another, then the first service uses as much of the remaining bandwidth as
it needs. If there is no more bandwidth for the second service, then it waits. If you do not select
a service in this wizard (or if you do not find a particular service), the service can still use
bandwidth, but it does not have any guaranteed amount and it has the lowest priority. See
Chapter 17 on page 197
60
DESCRIPTION
Click this to go to the previous screen.
Click this if you want the ZyXEL Device to try to register your SIP account(s)
again.
Click this to close this screen and return to the main screen. The ZyXEL Device
saves the information you provided.
for more information.
P-2302HWUDL-P1 Series User's Guide