Main Window; Status Bar - ZyXEL Communications Network Device P-2302 User Manual

Table 3 Navigation Panel Summary
LINK TAB
Remote MGMT WWW
Telnet
FTP
SNMP
DNS
Security
Print Server General
File Sharing General
UPnP General
Maintenance
System General
Dynamic DNS
Time Setting
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart

2.4.3 Main Window

The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
Right after you log in, the Status screen is displayed. See
information about the Status screen.

2.4.4 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration has been
updated.
P-2302HWUDL-P1 Series User's Guide
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use SNMP to access the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Use this screen to change your anti-probing settings.
Use this screen to give a name to the printer connected to your ZyXEL
Device.
Use this screen to enable file sharing via the ZyXEL Device and setup a
user's name and password for secure access to your shared files.
Use this screen to enable UPnP on the ZyXEL Device.
Use this screen to configure general system settings.
Use this screen to set up dynamic DNS.
Use this screen to change your ZyXEL Device's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to change your ZyXEL Device's log settings.
Use this screen to upload firmware to your ZyXEL Device.
Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
Use this screen to reboot the ZyXEL Device without turning the power off.
Chapter 4 on page 67 for more
45