Firewall Screens; General Firewall Screen; Figure 106 Ip Alias; Figure 107 Security > Firewall > General - ZyXEL Communications Network Device P-2302 User Manual

Figure 106 IP Alias

14.3 Firewall Screens

14.3.1 General Firewall Screen

Use this screen to configure the basic settings for your firewall. To access this screen, click
Security > Firewall > General.
Figure 107 Security > Firewall > General
Each field is described in the following table.
Table 78 Security > Firewall > General
LABEL
Enable Firewall
Bypass Triangle
Route
Max NAT/Firewall
Session Per User
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Select this to activate the firewall. The ZyXEL Device controls access and protects
against Denial of Service (DoS) attacks when the firewall is activated.
Select this if you want to let some traffic from the WAN go directly to a computer in
the LAN without passing through the ZyXEL Device. See the appendices for more
information about triangle route topology.
Select the maximum number of NAT rules and firewall rules the ZyXEL Device
enforces at one time. The ZyXEL Device automatically allocates memory for the
maximum number of rules, regardless of whether or not there is a rule to enforce.
This is the same number you enter in Network > NAT > General.
Chapter 14 Firewall
183