Understanding The Embroidering Screen - Brother PR1055X Operation Manual

Understanding the embroidering screen

From this screen, the total number of thread colors, the
embroidering order and embroidering time can be checked,
the needle bar settings can be specified, and the needle
placement forward or backward can be done. Keys available
in this screen differ when you set [Manual Color Sequence] to
[ON] in settings screen. (page 58)
1
2
3
4
5
6
Display
No.
Key Name
The embroidering progress is
shown by the red mark in the
indicator. Touch
1
display (in the indicator) only
Progress bar
the thread color being
embroidered.
Shows the part of the pattern
that will be embroidered
2
with the thread color shown
Region
first in the thread color
display
sequence display.
Shows the order for the
thread color changes. During
embroidering, this display
scrolls automatically so that
Thread color
the color of the thread
sequence
currently being embroidered
display
appears at the top.
Indicates the needle bar
number where the thread
3
color at the left is assigned.
Needle bar
number
The thread color sequence
display shows the first seven
thread colors. To check the
sequence for the eighth and
later thread colors, touch
Scroll bar
or
scroll bar.
7
8
Function Page
to
—
—
—
—
—
, or touch the
Display
No.
Key Name
This red line indicator shows
4
when the thread spools will
Spool change
need to be changed.
indicator
Quit embroidering and
return to the embroidering
Return key
settings screen.
While embroidering, touch
this key for the machine to
Reserve stop
stop prior to the next color
key
beginning.
Switch spool
key
Change the needle bar
(Not available
settings from the screen
in the
without changing the thread
[Manual
spools on the machine.
Color
Sequence]
mode)
Enable the needle bar
Temporary
settings to manually be
needle bar
specified.
5
settings key
Move the needle forward or
backward through the
stitching. Use this key in the
following situations:
• If the thread breaks or runs
Forward/ out while embroidering
Backward
• To restart embroidering
stitch key
from the beginning
• To continue embroidering
after the machine was
turned off
Specify the maximum
embroidery speed.
• Specify a low speed for
thin, thick or heavy
Maximum
fabrics.
embroidery
• When using a weak thread
speed key
such as metallic thread,
specify an embroidery
speed of 400 spm.
Unlocks the machine so it
can start embroidering
within 10 seconds. When
6
this key is touched, the
Unlock key
"Start/Stop" button flashes in
green.
BASIC EMBROIDERY
Function Page
91
—
119
57
120
93
190
87
89
2