Brother PR1055X Operation Manual page 29

■ Wireless LAN settings
9
1 Enable/Disable the wireless LAN function.
2 Shows the connected SSID.
3 Set the machine to connect wireless LAN function.
4 Shows the machine name used on the wireless network.
This name is used when transferring files from the
machine to the embroidery editing software (PE-DESIGN
version 11 or later).
5 Change the machine name used on the wireless
network.
6 Check the wireless LAN status.
7 Display other menus.
8 Reset network operations.
9 Display the introduction to the application.
■ Setting the [Eco Mode] and the [Shutoff
Support Mode]
You can save the machine power by setting the [Eco
Mode] and the [Shutoff Support Mode]. If you leave the
machine turned on without using it for the set period of
time, the machine enters in each mode.
[Eco Mode]:
Machine will enter a sleep mode after the set period of
time. Touch the screen or press the "Start/Stop" button to
continue operating.
[Shutoff Support Mode]:
Machine will turn off after set period of time. Turn the
machine off and then back on to restart operating.
Touch to display [Eco Mode] and [Shutoff Support
Mode]. (page 26)
Note
• If you turn off the machine while the machine is in
the [Eco Mode] or the [Shutoff Support Mode], wait
for about 5 seconds before turning on the machine
again.
■ Changing the screen saver image
You can select your own personal images for the screen
saver of your machine.
Before changing the screen saver image, prepare the
1
image on your computer or USB media.
2
For details on compatible image files, refer to
3 "SPECIFICATIONS" on page 190.
4
a Touch
5
 The general settings screen appears.
6
b Locate [Screen Saver] in the general settings screen.
7
8
c Touch
Touch
d
e Connect the USB media or the computer (using a USB
cable) that contains your personal image to the USB
port of the machine.
f Touch
g Select the device that is connected.
 A list of your personal images appear on the screen.
• Touch
• Touch
h Touch a file name to select image and then touch
 The selected image is stored on your machine.
i Repeat steps
images.
j Touch
GETTING READY
, then .
.
.
to select the first image.
to delete the selected image.
to return to the previous screen.
.
f h
through to set the remaining
to return to the original screen.
1
27