Turning On The Power - Bowflex TreadClimber TC6000 Assembly Manual & Owner's Manual

Turning on the Power

After you have completed all the steps in the Assembly Guide section of this manual and plugged the power cord
into the receptacle on the base assembly of the unit and wall outlet, the TreadClimber® fitness machine can be
turned on and calibrated for use.
noTe: Before turning on the power, ensure that the wall outlet the
into is a non-GFI protected circuit.
Locate the red power switch/circuit breaker on the front of the TreadClimber® fitness machine and move the
switch to the ON position. When the switch is ON, the power switch will be illuminated.
Power Connection on the base assembly and power on/off switch.
Treadclimber® fitness machine is plugged
BEFORE USING THE TREADCLIMBER® FITNESS
MACHINE, READ AND FOLLOW THE SAFETY
PRECAUTIONS ON PAGES 3 AND 4. MAKE SURE
THAT ANY OTHER USERS OF THE FITNESS MACHINE
REVIEW THE SAME SAFETY PRECAUTIONS AND
THAT THIS MANUAL IS AVAILABLE TO THEM.
Bowflex® TreadClmber® Assembly and Owner's Manual
geTTing sTarTed