Walking Belt Adjustment; Misalignment Test And Resolution - Bowflex TreadClimber TC6000 Assembly Manual & Owner's Manual

Walking belt adjustment

If either of the walking belts seem to be tracking excessively to one side or the other, adjustments can be made at the
front roller of each treadle.

misalignment Test and resolution

Visual Test – Standing beside the unit, set the speed at 2 MPH (3.2 KPH). Standing in front of the unit you will see
adjustment bolts on each end of each front roller. If the belt is tracking too far to the right, tighten the right adjustment
bolt on that roller using the provided hex key in full turn increments to realign belt. If the belt seems to be tracking too far
to the left, do the same thing on the left adjustment bolt for that roller.
NOTE: Belts should not be so tight that you cannot get your hand under them when machine is turned off and
unplugged.
SeCURe LOnG HAIR AnD LOOSe CLOTHInG BeFORe WORKInG neAR
THe TReADCLIMBeR® FITneSS MACHIne WALKInG SURFACe OR
PULLeYS.
care of your Treadclimber® fiTness machine
Belt Adjustment Bolts:
Turn in full turn increments
to adjust.
Walking Belt Correctly
Aligned
Bowflex® TreadClmber® Assembly and Owner's Manual