Omron PocketTens Instruction Manual page 28

If this happens... Possible causes...
Pad gel does not Are you using the pads
stick to skin. during perspiring?
Have the pads been
washed too long and/
or too frequently?
Were the pads
stored under high
temperature, high
humidity, or direct
sunshine?
Pad Light is blinking. Are both pads
attached to the body?
TROUBLESHOOTING
Try this solution... If this happens...
Dry the pad Pad Light is blinking. Have you removed
placement area.
Leave the pads in
refrigerator (do not
freeze) for overnight.
Replace both pads.
Re-attach dislocated
pad(s) onto the skin
firmly.
If the above measures are not effective, visit our website
(www.omron-healthcare.com) for contact information.
27
Possible causes... Try this solution...
Peel off film on the
the transparent film adhesive surface of
from the pads? pads.
Is the cord properly Connect cord plug
connected to the correctly into the jack
main unit? at the bottom of the
main unit.
Is the adhesive Wash adhesive
surface of pads dirty surface of pads softly
or dry? with your fingertips
for about 3 seconds
under slow running
cold water.