Stihl FS 160 Instruction Manual page 75

2
WARNING
Deflector (2) may also be used for
mowing heads if it is equipped with the
skirt and line limiter blade, see
"Mounting Skirt and Blade".
3
WARNING
Deflector (3) is approved for shredder
blades only and must therefore be
mounted before fitting a shredder blade.
FS 160, FS 220, FS 280, FS 290
4
5
WARNING
The limit stop (4) is approved as a
deflector for circular saw blades only
and must therefore be mounted before
fitting a circular saw blade. It is also
necessary to change the guard ring (5),
see "Mounting the Cutting Attachment" /
"Mounting Circular Saw Blades".
Mounting the Deflector
Deflectors (1 to 4) are mounted to the
gearbox in the same way.
7
6
Remove dirt from joints on gearbox
N
and deflector – make sure that no
dirt gets into the screw holes in the
gearbox.
Place the deflector on the
N
gearbox (6).
Insert the screws (7) and tighten
N
them down firmly.
Fitting the Skirt
When using mowing heads
3
1
2
1
The deflector for metal mowing
attachments (1) must be equipped with
the skirt (2) when you use mowing
heads.
Slide the lower guide slot (3) of the
N
skirt (2) onto the deflector (1) – it
must snap into position.
English
2
73