Stihl FS 160 Instruction Manual page 67

Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted because of the risk of
accidents.
Cutting attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
1)
3 STIHL AutoCut 40-4
4 STIHL AutoCut 46-2
5 STIHL TrimCut 41-2
6 STIHL DuroCut 40-4
7 STIHL PolyCut 41-3
Metal cutting attachments
8 Grass cutting blade 230-4
(230 mm dia.)
9 Grass cutting blade 255-8
(255 mm dia.)
10 Grass cutting blade 250-40 Spezial
(250 mm dia.)
11 Brush knife 305-2 Spezial
(305 mm dia.)
12 Brush knife 300-3
(300 mm dia.)
FS 160, FS 220, FS 280, FS 290
13 Shredder blade 270-2
(270 mm dia.)
14 Scratcher tooth circular saw blade
200
(200 mm dia.)
15 Chisel tooth circular saw blade 200-
22 (4119), chisel tooth circular saw
blade 200-22 HP (4000)
16 Scratcher tooth circular saw blade
225
(225 mm dia.)
17 Chisel tooth circular saw blade 225
(225 mm dia.)
18 Carbide tipped circular saw blade
225
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives, shredder blades and circular
saw blades are not approved.
Deflectors, Limit Stops
19 Deflector for mowing heads
20 Deflector with
21 skirt and blade, for mowing heads
22 Deflector without skirt and blade, for
metal cutting attachments, items 8
to 12
23 Deflector for shredder blade
24 Limit stop for circular saw blades,
items 14 and 15
1)
Approved for FS 280, 290 only
25 Limit stop for circular saw blades,
items 16 and 18
Harness
26 Full harness must be used
27 Full "deluxe" harness must be used
English
65