Step 4: Verifying The Settings; Powering Off The Appliance - Juniper JSA7800 How To Set Up

How to Set Up Your JSA7800 Appliance
A series of messages appears as JSA continues with the installation. Based on the appliance ID selected, the installation
process may take from several minutes to few hours to complete.
hours. When the JSA installation process is complete, the message window appears.

Step 4: Verifying the Settings

Verify the appliance configuration settings:
Open your Web browser.
1.
Log in to JSA with the username admin and the password <admin password>.
2.
<admin password> is the new admin password that you set during the configuration process.
Click Login .
3.
With this step, you have successfully completed the configuration, and your JSA7800 appliance is ready for use.

Powering Off the Appliance

You can power off the appliance in one of the following ways:
Graceful shutdown— Press and immediately release the
Forced shutdown— Press the
to the graceful shutdown method.
References
JSA Product Documentation
http://www.juniper.net/techpubs/en_US/release-independent/jsa/information-products/pathway-pages/jsa-series/product/
JSA7800 Hardware Documentation
http://www.juniper.net/techpubs/en_US/release-independent/jsa/information-products/pathway-pages/hardware/jsa7800-hw-guide.html
Technical Support
10
button, and hold it for five seconds. Use this method only if the appliance is not responding
Power
TA "All-In-One" or Console
Power button.
installation may take up to 2.5
Copyright © 2018, Juniper Networks, Inc.