Step 7: Finish Installation; Step 8: Verifying The Settings - Juniper JSA3500 Setup Manual

Select . The Date and Time window appears.
8. Next
Select the method you want to use to set the date and time.
9.
Manual— Allows you to manually input the date and time. Select
Server— Allows you to specify your time server. Select
Select your time zone continent or area, and then select
10.
Select your time zone region, and then select
11.
Select one of the following Internet protocol:
12.
IPv6—Internet Protocol version 6.
IPv4—Internet Protocol version 4.
Select Next . The Management Interface window appears.
13.
Select port 0 to specify as the management interface and then select
14.
Enter the values for the following parameters to configure the JSA Settings:
15.
Hostname - Type a fully qualified domain name as the system hostname.
IP Address - IP address of the system.
Network Mask - Network mask for the system.
Gateway - Default gateway address.
Primary DNS - Primary DNS server address.
Secondary DNS—Optional. Secondary DNS server address.
Public IP—Optional. Public IP address of the server.
Email server— E-mail server name. If you do not have an e-mail server, specify the local host in this field.
Select . The New Root Password window appears.
16. Next
Enter your new password, and select
17.
Re-enter your new password to confirm, and select
18.
this process takes from three-to-five minutes. When the JSA installation process is complete, the message window appears.

Step 7: Finish Installation

Select to complete the installation.
1. OK
Type exit and press
2. Enter

Step 8: Verifying the Settings

Verify the appliance configuration settings:
Open your Web browser.
1.
Log in to JSA with the username admin and the password <root password>.
2.
<root password> is the new root password that you set during the configuration process.
Copyright © 2018, Juniper Networks, Inc.
Next .
Next . The Confirm New Root Password window appears.
Finish
.
How to Set Up Your JSA3500 and JSA5500 Appliances
.
Next
.
Next
Next .
.
Next
. A series of messages appears as JSA continues with the installation;
7