Step 4: Verifying The Settings - Juniper JATP700 How To Set Up

How to Set Up Your JATP700 Appliance
Press Enter to complete the installation.
5.
All services are restarted. You are now ready to access JATP.
Type exit and press Enter.
6.

Step 4: Verifying the Settings

To verify the appliance configuration settings.
Open your Web browser.
1.
Log in to your JATP appliance:
2.
Where <IP Address> is the IP address of the JATP appliance.
Enter the default username admin and the default password juniper.
3.
Ensure to change the default password after the login. The password must be at least eight characters long.
8
https://<IP Address>
Copyright © 2018, Juniper Networks, Inc.