Juniper JSA7800 How To Set Up page 8

How to Set Up Your JSA7800 Appliance
Selecting the Internet Protocol and Configuring Your Appliance
Select one of the Internet protocols, IPv6 or IPv4.
1.
Select . The Management Interface window appears.
2. Next
Select the management interface, and then select
3.
Enter the values for the following parameters:
4.
Hostname— Type a fully qualified domain name as the system hostname
IP Address, Network Mask, Gateway, and Primary DNS
Optional— Secondary DNS and Public IP.
Email server— E-mail server name. If you do not have an e-mail server, specify the local host in this field.
8
.
Next
Copyright © 2018, Juniper Networks, Inc.