Juniper JSA7800 How To Set Up page 5

Read the information and press the Spacebar to advance each window until you have reached the end of the agreement.
3.
Type YES to accept the agreement, then press
4.
NOTE: Use the up/down arrow keys to highlight another option and press the spacebar to make the selection.
Use the left/right arrow keys to select Next, Back or Cancel, then press Enter.
Selecting an Appliance ID and Tuning Your Appliance
Select the appliance ID and then press
1.
Select one of the following setup types:
2.
normal—Default setup
recovery—HA recovery setup
Copyright © 2018, Juniper Networks, Inc.
. The Appliance ID selection window appears.
Enter
to select .
Enter Next
How to Set Up Your JSA7800 Appliance
5