Version - Bosch PRAESENSA PRA-SCL Configuration Manual

PRAESENSA
6.2

Version

The Version page in the Diagnose section is used to check the hardware version of the
connected network devices, their firmware version and other relevant information.
For devices with a LCD (e.g. a Call station), most of this information is also available from the
LCD, but for devices without LCD this Version page provides the relevant information.
–
Item
Name
Device type
Hostname
Serial number
Hardware
Firmware
Print
Notice!
Have the version info available when contact technical support.
Bosch Security Systems B.V.
The following information is presented on the Version overview page:
Description
Shows the name of the device. See System composition, page 40
The device type name (i.e. Amplifier) description is fixed and cannot be
changed. See System composition, page 40 .
The unique hostname of the device. The hostname consists of the
commercial type number (CTN) and a part of the MAC address. See the
product label on the device and System composition, page 40 .
The unique serial number of the device. See the product label on the
device. The serial number is fixed and cannot be changed.
The unique hardware version of the device. See the product label on
the device. The hardware version description is fixed and cannot be
changed.
Click Details to see more detailed information of the hardware used,
e.g PCB type/revision version number.
The unique firmware version of the device.
With the exception of uploading other firmware, the firmware version
description is fixed and cannot be changed.
Click Details to see more detailed information of the firmware used,
e.g. processor version numbers.
Click the Print button to produce and save a PDF file of the version
overview page. Notice that you need a PDF printer installed to generate
a PDF document.
Configuration manual
Diagnose | en 107
2020-09 | V1.20 | PRAESENSA 1.20