Bosch PRAESENSA PRA-SCL Configuration Manual page 64

64 en | Configure the system
Alert messages
Here you could add (or rename) a free chosen name for the Alert messages tile used by the
selected call station. It becomes a label as shown in the call station display Alert messages
tile.
To do so:
1.
Call station top‑ and bottom-side indicators
The top-side indicators and LCD indicate correct functionality and faults.
To put the call station in identification mode (LEDs blinking), see System composition, page
40 .
PRA-CSLD
2020-09 | V1.20 | PRAESENSA 1.20
See the Recorded messages chapter as previously described. The naming procedure is
similar.
PRA-CSLW
Power on
Device in identification
mode
PRA-CSLD
Status business call
Microphone active
Chime/message active
Status emergency call
Microphone active
Alarm tone/message
active
PRA-CSLW
Status business call
Microphone active
Chime/message active
Status emergency call
Green
Green blinking
Green
Green blinking
Red
Red blinking
Green
Green blinking
Configuration manual
System fault present
4.3" full‑color capacitive
touch screen
Identification mode /
Indicator test
Bosch Security Systems B.V.
PRAESENSA
Yellow
LCD
All LED's blink