Bosch PRAESENSA PRA-SCL Configuration Manual page 58

58 en | Configure the system
Front panel indicators
The front panel indicators indicate correct functionality and faults. The table following
indicates the active state.
To make device identification visible, see System composition, page 40 .
Rear panel indicators and controls
The rear panel indicators indicate correct functionality and faults. The table following
indicates the active state.
To make device identification visible, see System composition, page 40 .
2020-09 | V1.20 | PRAESENSA 1.20
48 VDC amplifier power
supply A-B (1-3)
Power on
Fault
Device fault present
Battery status
Full (float charging)
Charging (bulk or
absorption charging)
Fault
Identification mode /
Indicator test
100 Mbps network
1 Gbps network
Power on
Identification mode /
Indicator test
Configuration manual
24 VDC auxiliary power
supply A-B
Green Power on
Yellow Fault
Yellow Network link to system
controller present
Network link lost
Mains present
Green Mains fault
Green blinking
Yellow
All LEDs blink
Yellow Device fault present
Green
Green Device reset (to factory
default)
All LEDs blink
PRAESENSA
Green
Yellow
Green
Yellow
Green
Yellow
Yellow
Button
Bosch Security Systems B.V.