S300-DIN-L
Ground Strap
The ground strap is used to provide ground to the enclosure door.
To install the ground strap:
1. Put one ring terminal over the screw in the side panel and secure with a nut.
2. Put the other ring terminal over the screw in the enclosure door and secure
with a nut.
24-10239-340 Rev. B
This document contains confidential and proprietary information of Johnson Controls
© 2017 Johnson Control
Mounting holes
20"
(51cm)
Ground strap
Hardware Installation
16"
(41cm)
6.6"
(17cm)
3