When An Error Message/Error Code Is Displayed; When An Error Message Is Displayed; When An Error Code Is Displayed - Canon imageRunner Advance 400iF Starter Manual

When an Error Message/Error Code Is Displayed

When an Error Message Is
Displayed
Error messages may appear on the touch panel display
of the machine or the Web browser.
Self-diagnostic error messages appear in the following
cases:
When scanning or printing cannot be performed
●
because of an operational error
When you need to make a decision or take some
●
action during scanning or printing
When you need to make a decision or take some
●
action while browsing the network
Example of an Error Message on
the Touch Panel Display
Example of an Error Message on
the Web Browser
For information on error messages and instructions on
resolving errors, see e-Manual > Problem Solving.
When an Error Code Is
Displayed
If a job or operation does not complete successfully,
the error code is displayed on the Details screen for Log
on the Status Monitor/Cancel screen.
You can check the error code in the following locations:
Details screen for Log on the Status Monitor/
●
Cancel screen:
When a job or operation is not completed normally:
Results row of the Communication Management
●
Report:
If an error occurs during a send, receive, or fax job,
the error code is printed.
04/08/2012
DEVICE INFORMATION COMMUNICATION LOG REPORT
START TIME END TIME TYPE
DELIVER
DELIVER
DELIVER
DELIVER
For information on error codes and instructions on
resolving errors, see e-Manual > Problem Solving.
iRADV 500iF
TO/FROM DATA DETAILS RESULT
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
57