Launching Alp Splash Screen; Initial Alp Screen - Texas Instruments DS90UB95 Q1EVM Series User Manual

Software for DS90UB95xQ1-EVM Evaluation - Analog LaunchPAD (ALP) Software Setup
11.4 Startup - First Launch
Make sure all the software has been installed and the hardware is powered on and connected to the PC.
Execute "Analog LaunchPAD" shortcut from the start menu. The default start menu location is under All
Programs > Texas Instruments > Analog LaunchPAD vx.x.x > Analog LaunchPAD to start MainGUI.exe.
Upon first launch of the Analog LaunchPAD utility, the default device will be DS90UB925. The active
device can be seen as highlighted in
device is already set to DS90UB95x you may skip to
16
DS90UB95x-Q1EVM Deserializer User's Guide
Figure 8. Launching ALP Splash Screen
Figure 9, here showing the DS90UB95x as active. If the active
Section
Figure 9. Initial ALP Screen
Copyright © 2017–2019, Texas Instruments Incorporated
12.
SNLU223A – August 2017 – Revised May 2019
Submit Documentation Feedback
www.ti.com