Table of Contents
Advertisement
www.ti.com
12.4 Startup - First Launch
Make sure all the software has been installed and the hardware is powered on and connected to the PC.
Execute "Analog LaunchPAD" shortcut from the start menu. The default start menu location is under All
Programs > Texas Instruments > Analog LaunchPAD vx.x.x > Analog LaunchPAD to start MainGUI.exe.
Upon first launch of the Analog LaunchPAD utility, the default device will be DS90UB925. The active device can
be seen as highlighted in
to DS90UB954 you may skip to
SNLU223D – AUGUST 2017 – REVISED FEBRUARY 2023
Submit Document Feedback
Software for DS90UB954Q1-EVM Evaluation - Analog LaunchPAD (ALP) Software Setup
Figure 12-1. Launching ALP Splash Screen
Figure
12-2, here showing the DS90UB954 as active. If the active device is already set
Section
13.
Figure 12-2. Initial ALP Screen
Copyright © 2023 Texas Instruments Incorporated
DS90UB954-Q1EVM Deserializer User's Guide
17
Advertisement
Table of Contents
