Table of Contents
Advertisement
www.ti.com
12.4 Saving and Loading Register Settings
Register settings can be saved and later loaded to the device using the "Save" and "Load" buttons. To
save, click on the "Save" button, select the file location, and name the file. If desired, comments may be
recorded about the register settings . After the registers are saved, a dialog box will appear confirming that
the registers were saved successfully. To load saved registers, click the "Load" button and select the .nrd
file. Additional information about the register settings, including any comments, will be displayed in the
dialog box. After confirming these are the desired registers settings, a message will appear confirming that
the registers were successfully loaded.
SNLU223A – August 2017 – Revised May 2019
Submit Documentation Feedback
Figure 16. Save Register Settings Step 1
Copyright © 2017–2019, Texas Instruments Incorporated
Using ALP and DS90UB95x Profile
2
DS90UB95x-Q1EVM Deserializer User's Guide
1
23
Advertisement
Table of Contents
