Juniper J Series Quick Start Manual page 12

J-series Services Router Quick Start
12
JUNOS CLI Basics
To use command completion, type the first few letters of a command and press the
Spacebar or the Tab key.
For example, when you type the following partial command, the system completes
the command show chassis hardware and displays hardware information:
root> sh ch h
Hardware inventory:
Item Version
Chassis
Routing Engine RevX1.8
FPC 0 RevX1.5
PIC 0
Type the following partial command to display the JUNOS software version running
on the router:
root> sh ver
Hostname: host
Model: j2300
JUNOS Software Release [8.0-20060607.0] (Export edition)
To access configuration mode, enter the configure command. The prompt changes
to a pound sign (#).
root> configure
root#
To exit configuration mode, enter the exit command. Use the exit command again
to exit the CLI completely.
root# exit
root> exit
root@%
Part number Serial number
JN000212AA
710-009989 CORE97133
710-009991 CORE96352
Description
J2300
RE-J.1
FPC
2x FE, 2x Serial