Junos Cli Basics - Juniper J Series Quick Start Manual

For configuration details and tasks not covered by Quick Configuration, you can
access a graphical version of the JUNOS CLI known as the J-Web configuration
editor. Select Configuration>View and Edit Configuration>Edit Configuration to
display a list of configurable features—like the list displayed when you enter set ? in
CLI configuration mode.
When you click OK or Apply on J-Web Quick Configuration pages, the configuration
is saved and activated automatically. In contrast, you must click Commit to apply
changes on J-Web configuration editor pages.
For complete information about J-Web configuration features, see the J-series
Services Router Basic LAN and WAN Access Configuration Guide.

JUNOS CLI Basics

After you start the CLI with the cli command, type a question mark (?) to display a
list of the available commands:
root> ?
Possible completions:
To display the options available for a command, type the command followed by a
space and a question mark:
root> show ?
Possible completions:
---(more 93%)---
clear Clear information in the system
configure Manipulate software configuration information
file Perform file operations
help Provide help information
monitor Show real-time debugging information
mtrace Trace multicast path from source to receiver
ping Ping remote target
quit Exit the management session
request Make system-level requests
restart Restart software process
set Set CLI properties, date/time, craft interface message
show Show system information
ssh Start secure shell on another host
start Start shell
telnet Telnet to another host
test Perform diagnostic debugging
traceroute Trace route to remote host
accounting Show accounting profiles and records
aps Show Automatic Protection Switching information
arp Show system Address Resolution Protocol table entries
as-path Show table of known autonomous system paths
bfd Show Bidirectional Forwarding Detection information
bgp Show Border Gateway Protocol information
chassis Show chassis information
class-of-service Show class-of-service (CoS) information
cli Show command-line interface settings
configuration Show current configuration
connections Show circuit cross-connect connections
dialer Show dialer information
dlsw Show DLSw information
J-series Services Router Quick Start
JUNOS CLI Basics
11