Figure 75. Installing the screws to secure the system board
16. Route all the cables that you disconnected from the failing system board, and then reconnect the cables
to the new system board. See "System board" on page 4.
17. Complete the replacement. See "Completing the parts replacement" on page 53.
Completing the parts replacement
After completing the installation or replacement for all parts, Complete the replacement.
To Complete the replacement to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
3. Reinstall the computer cover.
Figure 76. Reinstalling the computer cover
.
Chapter 6
Replacing hardware
53