Figure 21. Installing the internal speaker
4. Connect the internal speaker cable to the internal speaker connector on the system board.
5. Complete the replacement. See "Completing the parts replacement" on page 53.
Replacing the system fan
Attention: Do not open the computer or attempt any repair before reading and understanding "Read this
first: Important safety information" on page v in this document.
1. Remove the computer cover. See "Removing the computer cover" on page 27.
2. Remove the storage drive. See "Replacing the storage drive" on page 28.
3. Remove the internal speaker. See "Replacing the internal speaker" on page 30.
4. Release the illuminated red dot cable from the system fan.
5. Disconnect the system fan cable from the system fan connector on the system board.
6. Replace the system fan.
Figure 22. Removing the system fan
.
Chapter 6
Replacing hardware
31