Resetting
Additional functions
With these functions, it is possible to adjust individual parameters to
adapt program cycles to particular types of soiling and optimize
cleaning results.
Additional settings
Select the
Additional functions
Select
pressing the OK button.
In the following menu, you can choose between:
Reset
–
Reset all of the parameters changed under the "Additional
functions" menu to their factory defaults.
Increased water level
–
Increase the amount of water used in all wash programs.
Interim rinse
–
Include an interim rinse in all programs that support this feature
(see "Program chart").
Dispensing system
–
Vent the dispensing systems and change the name of the dispenser
modules.
Temperature / Time
–
Change the temperature and holding time for the main wash and
final rinse stages of a wash program.
Select the
Reset
option and confirm your choice with the
OK button.
Reset
Yes
No
(
Yes
Select the
option and confirm your choice with the OK button.
All parameters that have been changed under "Additional
functions" will be reset to the factory default setting.
Additional settings
menu.
and open the corresponding menu by
79