Miele PG 8056 Operating Instructions Manual page 47

Setting the
dispensing
concentration
Refilling or
changing
containers
For information about setting the dispensing concentration, see
"Additional settings/Additional functions/Dispensing systems".
The dispenser module is equipped with a level monitoring indicator
which shows a message in the display when the level drops below
the minimum.
Refill DOS
As soon as the message appears in the display, refill or replace the

container with a full one containing the appropriate process
chemical at the end of the program.
Confirm the message shown with the OK button.

Replace the container in time to prevent the dispensing system
from being emptied completely.
An empty dispensing system must be vented before the next
program is started.
Place the container on the open dishwasher door or on a surface

which is easy to clean.
Unscrew and remove the suction wand. Place the suction wand on

the open wash cabinet door.
Replace the empty container with a full one.

Push the suction wand into the opening of the container and screw

it on tightly. Observe the color coding.
Wipe up any spilled process chemical thoroughly.

Place the container on the floor beside the Commercial Dishwasher

or in an adjacent cabinet. The container must be at the same level
as the machine and not be placed on top of or above the machine.
The dispensing system must then be vented.

K
OK
Operation
47