Additional Settings; Accessing The "Additional Settings" Menu - Miele PG 8056 Operating Instructions Manual

Additional settings

Options in the
"Additional
settings" menu
70

Accessing the "Additional settings" menu

To access the "Additional settings" menu:
Turn the dishwasher off.

Press and hold the  button and, at the same time, turn the

dishwasher on using the  button.
The display will then show the following options, for example:
Menu
Settings 
Additional settings
If the  button is pressed at this menu, the dishwasher will exit the
additional settings and return to normal operation.
Additional settings
Select

pressing the OK button.
This menu can be protected with a PIN code (see "Additional
settings, Code").
– Code
Assign a PIN code and configure settings (see "Code")
Log book
–
Display consumption levels for supplies used and operating hours
(see "Log book")
– Temperature unit
Choose a temperature unit of either °C or °F (see "Temperature
unit")
– Move program
Assign programs to the shortcut buttons (see "Move program")
Additional functions
–
Modify program parameters such as water intake, interim rinses,
temperatures, and holding times, as well as detergent
concentration levels for the DOS module (see "Additional
functions")
Release program
–
Determine the availability of individual programs for operation (see
"Program access")
– Water hardness
Set the water hardness level (see "Water hardness" and "Water
softener")
– Display view
Switch the display between the set and actual temperatures (see
"Display view")
and open the corresponding menu by