Program End; Turning Off The Dishwasher; Unloading The Dishwasher - Miele PG 8056 Operating Instructions Manual

Program end

After a program has ended normally, the Start/Stop button's LED will
go out and the  button's LED will flash. The message
finished
will appear in the bottom line of the display.
Universal
Temperature
Program finished
In addition to this, an audible signal will sound for approx. 3 seconds
(factory default setting). To alter the audible signals, see "Settings ,
Volume".
If the switch-off function is enabled, the Commercial Dishwasher
switches itself off after a short period of time.
Press the  button to switch it on again.

Turning off the dishwasher

Press the  button until the button's LED goes out.


Unloading the dishwasher

Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are cool enough to handle before
unloading them.
The dishes will cool much faster if you open the door when the
program has ended.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.
55 °C
Operation
Program
53