Miele PG 8056 Operating Instructions Manual page 24

Initial commissioning
Water
connections
Commissioning
completed
24
The display will then change to the screen for setting the water
connection.
This setting can be disabled if it is not possible to connect the
dishwasher to all available water connections.
If individual water connections are disabled, they can only be
enabled again by Miele Service.
Plumbing connections
Accept
Cold water
9
Use the  and  arrow buttons to select the water connections

which are not in use, and confirm your choice with the OK button.
The checkmark  will be removed from the box  and the water
connection is then disabled.
Select Accept to save your choice, and confirm your setting with

the OK button.
Commissioning is successfully completed and the following message
will appear in the display.
Set up successful
Press the OK button.

M
The dishwasher is now ready for use.
PROFESSIONAL
PG 8056
The start screen is displayed for 3 seconds.
Then the first shortcut button program will appear in the display.
;
,

OK