Additional settings
Options in the
"Additional set-
tings" menu
72
Accessing the "Additional settings" menu
To access the "Additional settings" menu:
Turn the dishwasher off.
Press and hold the button and, at the same time, turn the dish-
washer on using the button.
The display will then show the following options, for example:
Menu
Settings
Additional settings
If the button is pressed at this menu, the dishwasher will exit the
additional settings and return to normal operation.
Select
Additional settings
pressing the OK button.
This menu can be protected with a PIN code (see "Additional set-
tings, Code").
–
Code
Assign a PIN code and configure settings (see "Code")
Log book
–
Display consumption levels for supplies used and operating hours
(see "Log book")
Temperature unit
–
Choose a temperature unit of either °C or °F (see "Temperature
unit")
–
Move program
Assign programs to the shortcut buttons (see "Move program")
Additional functions
–
Modify program parameters such as water intake, interim rinses,
temperatures, and holding times, as well as detergent concentra-
tion levels for the DOS module (see "Additional functions")
Release program
–
Determine the availability of individual programs for operation (see
"Program access")
Water hardness
–
Set the water hardness level (see "Water hardness" and "Water
softener")
Display view
–
Switch the display between the set and actual temperatures (see
"Display view")
and open the corresponding menu by