Audio-Visual (A/V) Alarm
(microprocessor controller)
An A/V alarm warns the operator of fault shutdowns and
pre-alarm conditions (except battery charger fault and
low battery voltage) from a remote location. A/V alarms
include alarm horn, alarm silence switch, and common
fault lamp. See Figure 1-4.
NOTE
Connect a maximum of three remote annunciators
and/or A/V alarms in any combination to the generator
set controller.
Figure 1-4. Audio-Visual Alarm
TP-5631 7/96
The line circuit breaker interrupts generator output in the
event of an overload or short circuit. Use the line circuit
breaker to manually disconnect the generator set from
the load when servicing the generator set.
Figure 1-5.
A-292887
Line Circuit Breaker
Figure 1-5. Line Circuit Breaker
See
TP-5352-1
Specifications 1-5