Kohler 6.5RMY Operation Manual page 15

Notice
NOTICE
This generator set has been rewired from its
nameplate voltage to:
NOTICE
Voltage reconnection! Affix notice to generator set
after reconnecting to a voltage different than the
nameplate. Order voltage reconnection decal 246242
from authorized service distributors/dealers.
XII Safety Precautions and Instructions
Hardware damage! Engine and generator set may use
both American Standard and metric hardware. Use the
correct size tools to prevent rounding of bolt heads and
nuts.
When replacing hardware, do not substitute with
inferior grade hardware.
available in different hardness ratings.
Standard hardware uses a series of markings and
246242
metric hardware uses a numeric system to indicate
hardness. Check markings on bolt head and nuts for
identification.
Canadian installations only:
For standby service connect output of generator set to a
suitably rated transfer switch in accordance with
Canadian Electrical Code, Part 1.
NOTICE
NOTICE
Screws and nuts are
American
NOTICE
TP-5631 7/96