Upgrade Firmware - Crestron DM Lite HD(I)-MD Series Supplemental Manual

Load a Configuration File
In the Save/Load Configuration section, do the following to load a configuration file:
1. Click Browse located to the right of the Load Configuration file field. Windows
Explorer opens.
2. Locate and select the desired configuration file (*.xml), and then click Open.
The Load Configuration file field displays the path to the selected configuration
file.
3. Click Load to load the configuration file. A prompt appears asking for
confirmation that the selected configuration file be loaded.
4. Click Yes. The Restoring message appears.
When the configuration file is loaded to the switcher, a message appears
indicating that the XML restore process is finished. The web interface then
returns to the Login page.

Upgrade Firmware

Upgrade firmware in the Firmware section of the Device page.
Device Page - Firmware
The Firmware section displays the following information about the receiver:
Model, which is HD-RX-201-C-E
•
Serial Number
•
Firmware Version
•
NOTE: The firmware file is an *.bin file. Before upgrading firmware, extract the *.bin file
from the *.zip file.
To upgrade firmware:
1. Click Browse located to the right of the Upload firmware file field. Windows
Explorer opens.
2. Locate and select the desired firmware file (*.bin), and then click Open.
The Upload firmware file field displays the path to the selected firmware file.
3. Click Load. A prompt appears asking for confirmation that the firmware
be upgraded.
30 • DM Lite HD(I)-MD Auto-Switchers and Extenders Supplemental Guide – DOC. 7797D